| Product Name | F-116 REV 1 |
|---|---|
| Shore Hardness | 15 A |
| Worktime | 4 - 5 minutes |
| Demold TIme | 1 - 2 hours |
| Shrinkage | 0.0010 |
| Viscosity | 1,200 cps |
| Ratio | 100/100 pbw |
15 SHORE A, POLYURETHANE ELASTOMER
BJB’s “F-1 Series”, with its 3 to 10 minutes of work time, addresses the need for shorter processing times and higher part production. These 5-95 Shore A products exhibit excellent physical properties and easily process at room temperature. You’ll also find the easy mix ratio to be extremely convenient. F-116 REV 1 can be cartridge-dispensed with our CPE handheld dispense equipment. For longer work times consider our F-115 REV 1 (9-10 min.) or M-3115 REV 1 (15-20 min.)
|
|
|
|
|
|
HELPFUL NOTES:
Color Variations: The color of the base material may vary slightly from batch to batch due to raw ingredients. Exposing the material to various conditions such as heat and UV light will alter the color of the cured system. Color stability is not guaranteed. This product can be pigmented, but you may see more color shift when using lighter pigments.
UV Resistance: This product is not classified as UV resistant. BJB offers an additive called UV-100, a UV inhibitor and anti-oxidant blend that will help slow down the effects of UV degradation and color change. The level of effectivness varies from product to product.
Silicone Molds: Platinum based silicones are recommended for molds. Tin based silicones may cause cure inhibition. For more info, contact our Tech Dept