CAMMO FLEX is a 100% solids epoxy system specially formulated to provide a
flexible surface for sculpturing and modeling projects. CAMMO FLEX will cure
into a durable rubber that will accommodate movement and even bend upon
cure.
PROPERTIES OF CAMMO FLEX
Compressive / Elongation 50+%
Tensile Strength ASTM D-638 1,000 p.s.i.
Hardness Shore A 90/85
Hardness Shore D 50/45
Viscosity Pourable or Gel
Mix Ratio 2:1 by Volume
Pot Life 60 minutes @70F
Cure Time 12 hours initial cure
Packaging Pint, Quart and Gallon Kits
Mixing and Application Instructions
Add entire contents of the Part B container into the Part A container. Using a
mixing stick or slow speed drill, thoroughly mix until streak free while being
careful to avoid whipping air into the mixture. Apply the CAMMO FLEX by hand,
brush or trowel to surface in thin layers up to 1/4” thick. Allow a 6 hour initial
cure before applying additional layers of CAMMO FLEX and allow 24 hour cure
before coating or painting the CAMMO FLEX