EasyFlo 120 is a 1:1 by volume (100A:90B by weight) low viscosity, 2 min. working time white polyurethane casting plastic designed for rotocasting or slush casting to create hollow parts.
Mix Ratio by Volume: 1A:1B
Mix Ratio by Weight: 100A:90B
Shore Hardness: D65
Pot Life: 2-2.5 min.
Demold Time: 15-30 min.
Cured Color: Off-White
Mixed Viscosity: 120 cP
Specific Volume: 26.9 in³/lb
Specific Gravity: 1.03
Linear Shrinkage: 0.0065 in/in
Elongation: 10.3 %
Tensile Strength: 3,534 psi
Elastic Modulus: 85,149 psi
Flexural Modulus: 133,765 psi
Flexural Strength, 5% Strain: 4,845 psi
Heat Deflection Temp.: 146°F
Max Exotherm: 200°F
Note: The color of polyurethane Part Bs may change in color from batch to batch or may darken with age, but product performance is not affected.
This is very tough plastic, hollow parts are nearly unbreakable.
WARNING: This product can expose you to chemicals including Butyl benzyl phthalate (BBP), which is known to the State of California to cause reproductive harm. For more information, go to www.P65Warnings.ca.gov.